KIMI Phone:+86 18059884790      中文版
LAM
Home > LAM
LAM 666-045257-003 FTC-DIN-SSMA-2512-LUM
  • Warehouse: Spot
  • Warranty: 365 days
  • Quality: Original module
  • Condition: New
  • Shipping method: Courier delivery

  • Contact person: LI MING
  • Contact number: +86 18059884790
  • WeChat:18059884790
  • E-mail: plc66@qq.com

Product Description
LAM RESEARCH  ·  666-045257-003 Fiber Optic Temperature Converter

666-045257-003 FTC-DIN-SSMA-2512-LUM Fiber Optic Temperature Sensor Converter

SKU: 666-045257-003  |  Photon Control OEM P/N: FGA-0172F  |  Single channel  |  SSMA fiber interface  |  Semiconductor chamber temperature monitoring
Core Application
Semiconductor etch chamber high temp measurement
     OEM Brand
Photon Control FTC-DIN series
     Fiber Connector
SSMA
     Status
Spare part for LAM etcher tools

The 666-045257-003 is LAM Research part number for Photon Control FTC-DIN-SSMA-2512-LUM single-channel fiber optic temperature converter, internal Photon Control part number FGA-0172F. It converts optical temperature signal from Gallium Arsenide fiber sensors into standard analog/digital output for chamber temperature control. Fiber optic design is immune to EMI, RF and plasma noise, ideal for high RF plasma etching environments. It is a dedicated spare module for LAM semiconductor etching systems, used for electrostatic chuck, chamber wall and process component temperature closed-loop control.

Typical deployment: LAM oxide / conductor etch platforms, plasma process chamber temperature monitoring, high-noise RF process environments where conventional RTD/thermocouple cannot work reliably.

image.png

Product Features

GaAs Fiber Optic Sensing Principle
Gallium arsenide crystal based temperature measurement, fully immune to RF, plasma and EMI interference.
Single Channel Measurement
One optical input channel with SSMA fiber connector, matched with LAM original fiber probes.
High Temperature Process Compatible
Supports high chuck temperature monitoring for dielectric and conductor etch recipes.
DIN Rail Compact Package
Standard DIN rail housing, designed for tool electronics cabinet integration.
Analog Output for Tool Controller
Temperature converted to analog signal, feeds back to LAM main process control for recipe stability.
Plasma Environment Resistant
No metal sensing tip inside chamber, avoids plasma arcing and contamination risk.
LAM Original Tool Calibration
Factory calibrated for LAM etch tools, cross model variant 001/003/006 have different fiber/outfit options.
Critical Process Spare
Failure will trigger chamber interlock, temperature fault and recipe abort during wafer production.

Application Scenarios

LAM Research Plasma Etch Tools
Oxide etch, polysilicon and metal conductor etch process platforms.
Electrostatic Chuck (ESC) Temperature Monitoring
Wafer chuck temperature closed-loop control for etch uniformity.
High RF Plasma Process Chambers
RF plasma environment where thermocouple / RTD suffers EMI noise.
Semiconductor Fab Spare Stock
Critical spare for 24/7 fab production, planned maintenance and emergency swap.
Chamber Retrofit & Fault Replacement
Direct replacement for failed FTC-DIN modules on matched LAM etcher chassis.
High Purity Vacuum Process Modules
Vacuum chamber temperature measurement without metal feedthrough contamination.

Frequently Asked Questions

Q: What is 666-045257-003?
A: LAM Research part number for Photon Control FTC-DIN-SSMA-2512-LUM fiber optic temperature converter, OEM P/N FGA-0172F.
Q: Why fiber optic temperature sensor for etch chamber?
A: GaAs fiber sensor is immune to RF plasma interference, no metal probe, avoids arcing and particle contamination.
Q: What is the difference between 001,003,006 suffix?
A: Different Photon Control sub-model, fiber connector type, firmware and output configuration, not cross-compatible without tool recipe validation.
Q: Can I use regular thermocouple instead?
A: Not for this LAM plasma chamber; RF noise causes unstable reading and chamber arcing risk.
Q: What connector does this unit use?
A: SSMA fiber connector, must match original LAM fiber probe cable assembly.
Q: Is this module calibrated?
A: New original units come factory calibrated; used surplus usually requires re-calibration before installation on production tool.
Q: How to confirm compatibility before ordering?
A: Confirm LAM tool model, chamber type, existing suffix number, fiber connector type and tool firmware version.


Related recommendations