KIMI Phone:+86 18059884790      中文版
KONGSBERG
​ Kongsberg RSER200-4 Serial Interface Module
  • Warehouse: Spot
  • Warranty: 365 days
  • Quality: Original module
  • Condition: New
  • Shipping method: Courier delivery

  • Contact person: LI MING
  • Contact number: +86 18059884790
  • WeChat:18059884790
  • E-mail: plc66@qq.com

Product Description
Kongsberg Maritime  ·  RIO200 Series

RSER200-4 Serial Interface Module

SKU: RSER200-4  |  Part No. 603444  |  4 Isolated Serial Channels  |  RIO200 Family
Channels
4 galvanically isolated serial ports
     Protocols
RS232 / RS422 / RS485 / NMEA 0183
     Baud Rate
300 bps up to 115.2 kbps
     Controller Link
Support up to 3 RCU (A/B/C) redundancy

The RSER200-4 (Part No.603444) is a 4-channel galvanically isolated serial communication module belonging to Kongsberg RIO200 family. It is designed to connect serial field devices to RCU602 and other RCU controllers in single, dual or triple redundant marine automation systems. Each channel is software configurable between RS232, RS422 and RS485, supporting NMEA 0183 navigation sensors and legacy serial instruments.

image.png

The module features three RJ45 ports for RCU redundant bus connection and one USB 2.0 service port for local test and configuration. It is horizontally mounted on the RIO200 dual rail system inside Kongsberg control cabinets, widely used for expanding serial ports in K-Chief and DP systems.

Product Features

Four Isolated Serial Channels
4 independent galvanically isolated serial ports to prevent ground loop interference and surge damage for marine field devices.
Software Configurable Interface
Each channel can be set as RS232, RS422 or RS485, supporting NMEA 0183 multidrop communication for navigation sensors.
Triple Redundant RCU Connection
3 RJ45 ports for linking to RCU A, B and C, fully compatible with dual or triple hot standby control architectures.
USB Service Interface
USB 2.0 full speed Type-B port for on-site testing, diagnostics and firmware configuration without extra adapters.
Wide Baud Rate Support
Baud rate adjustable from 300 bps up to 115.2 kbps, compatible with old and new marine serial instruments.
RIO200 Cabinet Rail Mount
Horizontal dual-rail installation inside Kongsberg standard cabinets, plug-and-play replacement for existing RIO200 racks.
LED Diagnostic Indicators
Built-in status LEDs for power, transmit, receive and module health to speed up on-site troubleshooting.
Marine Environmental Grade
Designed for marine automation, wide temperature range and EMC compliance for vessel and offshore control cabinets.

Application Scenarios

Dynamic Positioning System
Collect serial data from GPS, gyro, MRU, wind sensor and AIS for DP and joystick control cabinets.
K-Chief Vessel Automation
Serial port expansion module for K-Chief alarm, monitoring and propulsion control systems paired with RCU602.
Navigation Sensor Interface
NMEA 0183 signal aggregation for chart plotters, weather stations and navigational transducers.
Retrofit & Spare Upgrade
Drop-in spare part for aging Kongsberg RIO200 racks, adding serial capacity without cabinet modification.
Offshore Rig & FPSO Control
Connect legacy serial transmitters and gauges to redundant RCU control networks on offshore installations.
Serial Protocol Bridge
Interface between old serial instruments and modern RCU-based control logic for mixed-vessel refit projects.

Frequently Asked Questions

Q: What is RSER200-4 used for?
A: RSER200-4 (603444) is a 4-channel isolated serial interface module in RIO200 family. It expands serial ports for RCU controllers, collecting data from NMEA navigation sensors and RS232/422/485 marine instruments in Kongsberg automation and DP systems.
Q: Which RCU controllers can it connect to?
A: It supports connection to up to three RCU units (A/B/C), fully compatible with RCU602 and other RCU models for single, dual or triple hot standby configurations.
Q: Can I switch RS232 / RS422 / RS485 on each port?
A: Yes. Each of the four channels is software configurable, supporting NMEA 0183 multidrop communication for navigation equipment.
Q: What is the USB port for?
A: The USB 2.0 Type-B service port is used for local diagnostics, parameter configuration and firmware upload on site.
Q: How is it installed?
A: It is designed for horizontal dual rail mounting inside Kongsberg RIO200 cabinets, same mechanical form as other RIO200 modules for simple replacement.
Q: Is this module compatible with existing K-Chief systems?
A: Yes, it is a standard serial expansion part for K-Chief automation and DP systems, widely used for vessel retrofit and spare maintenance.
Q: How to confirm compatibility before ordering?
A: Please provide the part number, revision, cabinet type and RCU model of your existing setup. We will verify the hardware revision and firmware match before shipment.


Related recommendations