News
Featured
Contact Us
Contact: POWER DUKE
Phone: +86 18059884790
E-mail: plc66@qq.com
Add: fujian xiamen
- Warehouse: Spot
- Warranty: 365 days
- Quality: Original module
- Condition: New
- Shipping method: Courier delivery
- Contact person: LI MING
- Contact number: +86 18059884790
- WeChat:18059884790
- E-mail: plc66@qq.com
Valmet PDP403 Distributed Processing Unit (DPU4F)
Hot-standby controller module for Metso DNA / maxDNA process control systems. Part No. 181550 / 69230D403A, supplied with the dedicated redundancy backup cable (Metso #050292) — a direct replacement for legacy PDP 400 racks and new-build redundant controller pairs.

Product Overview
The Valmet PDP403 is a Distributed Processing Unit (DPU) built on the DPU4F control processor platform for Metso DNA and maxDNA distributed control systems — the automation platform now branded Valmet Automation. Installed in the leftmost slot of a maxPAC IOP rack, the unit scans field I/O over the I/O bus, executes regulatory, logic and sequence control programs, handles alarm processing and sequence-of-events time stamping, and publishes process data to the Maxnet control network. It operates either as a standalone controller or as one half of a 1:1 redundant pair, in which the secondary unit tracks the primary in a hot-standby state and takes over automatically on failure. Configuration, I/O sheet numbers, object locations and wiring data are stored on-board in a self-describing database, so the configuration actually running always matches the configuration installed.
Key Features & Functions
What the PDP403 actually does inside a running control system.
DPU4F control processing
Deterministic scan-based execution of regulatory control, interlock logic and sequence programs, with alarm processing and trend data generation for the whole I/O section assigned to the unit.
1:1 hot-standby redundancy
Two DPUs form a backup pair linked by the dedicated backup cable (#050292). The secondary runs in a warmed standby state and takes over automatically on a fatal fault; manual takeover is possible from the front-panel Takeover button.
Dual Maxnet Ethernet
Two independent Ethernet ports support redundant network paths A and B at 10/100/1000 Mbps full duplex, with per-port link and network-status LEDs for fast fault isolation.
Self-describing database
The object-oriented database keeps sheet numbers, object locations and wiring records on-board, so the running configuration can never diverge from the installed configuration — a major advantage during audits and loop checks.
Sequence of events & I/O bus
High-resolution event time stamping for trip and interlock analysis, with a software-backplane compliant I/O bus interface that maps the DPU to its IOP rack without hardware re-strapping.
Serviceability on the front panel
Mode switch (start-up / update / diagnostic settings), Reset and Takeover buttons, plus CP, IOM, I/O, State and Backup LEDs. Optional RS-232 serial port for local access; IRIG-B time sync is available on the PDP406 / PDP408 variants.
Application Scenarios
Where this module is normally installed, and what it is bought for.
Pulp, paper & board mills
Controller layer for digester, washing, bleaching, recovery boiler, stock preparation and paper machine wet-end loops running on Metso DNA.
Power & energy plants
Boiler and turbine auxiliary control, fuel handling, flue-gas and water treatment loops in biomass, WtE and utility boilers automated on maxDNA.
Chemical & refining
Continuous and batch process control where a controller restart is unacceptable — the redundant pair keeps loops, interlocks and alarms live through a unit failure.
Mining, metals & water
Grinding, flotation, thickener, pump-station and desalination control sections using the same DPU hardware family.
Legacy system support & spares
Drop-in replacement for failed PDP 400 series DPUs in installed Metso DNA / maxDNA systems, avoiding a full controller-platform migration for one failed card.
System expansion & retrofit
Adding a control section, a new IOP rack or a redundant partner to an existing standalone DPU during mill upgrades and capacity projects.
Frequently Asked Questions
Q. What is the difference between PDP403 and PDP401?
Both are the same DPU4F controller (#181550). PDP401 is delivered alone; PDP403 is the same unit supplied together with the redundancy backup cable #050292. If you are building or restoring a backup pair, order PDP403; for a standalone DPU, PDP401 is sufficient.
Q. How does PDP403 differ from PDP406 and PDP408?
PDP406 and PDP408 add the IRIG-B time-synchronisation port and the serial communication port (#181551); PDP408 additionally ships with the backup cable. PDP403 covers standard control duty without IRIG-B — check your existing unit's model number before ordering so the replacement matches the loop's time-stamp requirements.
Q. Can it be used as a standalone controller without a partner DPU?
Yes. A single DPU can operate standalone; a jumper plug (#081388) is placed in the backup connector, and from software version 4.1 the "StandAlone" redundancy option in DPU4FSetup removes the need for the plug.
Q. What is the correct replacement procedure in a backup pair?
Either move the CompactFlash from the failed unit to the replacement, or prepare a new card with the DPU4FSetup utility so the DPU name, IP address and configuration parameters are correct — the secondary address must be exactly one higher than the primary. Fit the unit in the leftmost slot of the rack, connect the backup cable, then confirm the Backup LED turns yellow and the unit reaches the warm-standby state before handing it over.
Q. Which software has to be on the CompactFlash?
A Windows CE image plus the maxDNA application, written with the DPU4FSetup utility from a maxSTATION. Mode "E" updates software only, mode "C" updates software together with the full configuration file and IP settings.
Q. Are the units tested, and what is the warranty?
Units are supplied new or professionally refurbished, functionally tested and shipped with a test record on request. Standard warranty is 12 months; lead time, price and available quantity are confirmed per inquiry against the exact part number (181550 / 69230D403A).
Need PDP403 for an installed Metso DNA system?
Send us the unit's label photo and part number — we will confirm the exact DPU4F variant, redundancy cable requirement and compatibility with your existing IOP rack, then quote price and lead time.



