News
Featured
Contact Us
Contact: POWER DUKE
Phone: +86 18059884790
E-mail: plc66@qq.com
Add: fujian xiamen
- Warehouse: Spot
- Warranty: 365 days
- Quality: Original module
- Condition: New
- Shipping method: Courier delivery
- Contact person: LI MING
- Contact number: +86 18059884790
- WeChat:18059884790
- E-mail: plc66@qq.com
VME32BACKPLANE Standard VME32 Bus Backplane
VME32BACKPLANE is a classic 32-bit VMEbus backplane compliant with IEEE-1014 standard, designed for VME32 crate systems. It provides parallel address/data bus, arbitration, interrupt and utility bus interconnection for VME master/slave boards, widely used in industrial control, military and aerospace legacy VME chassis replacement.

Product Overview
VME32BACKPLANE is a passive backplane for classic VME32 bus systems, following IEEE-1014 specification. It uses J1/J2 96-pin connectors, supports 32-bit address and data transfer, bus arbitration, priority interrupts and system reset signals. Available in multiple slot configurations, it interconnects VME CPU boards, I/O modules, communication cards and power modules inside the VME crate. It is a common replacement spare for aging VME chassis in industrial, defence and test equipment.
Key Features & Functions
Core features of the VME32BACKPLANE.
32-bit VME bus interconnection
Supports A32 addressing, 32-bit data width and BLT block transfer for high throughput.
Bus arbitration & interrupt routing
Integrated arbitration bus and 7-level priority interrupt bus for multi-master VME systems.
Passive termination design
Standard passive Thevenin termination, stable signal integrity for legacy VME modules.
J1/J2 dual connector layout
J1 for core bus signals; J2 for extended I/O and secondary user-defined signals.
Wide compatibility
Compatible with VME32, VME64 modules, supports 6U and 3U Eurocard boards.
Rugged PCB construction
Industrial grade PCB, anti-vibration, suitable for rack-mounted VME crate operation.
Application Scenarios
Typical installation and replacement scenarios for VME32BACKPLANE.
Legacy VME Crate Repair
Direct replacement for damaged or aged original backplanes in existing VME chassis.
Industrial VME Control System
VME CPU, digital I/O and analog I/O interconnection for process control equipment.
Test & Measurement Instrument
Used in automated test benches, signal acquisition and data logging VME systems.
Aerospace & Defence VME Platform
Maintenance spare for ruggedized VME embedded computing subsystems.
VME Communication Gateway
Backbone interconnect for VME serial, Ethernet and fieldbus interface boards.
Custom VME System Integration
New build of small-volume VME racks for special-purpose industrial equipment.
Frequently Asked Questions
Q. What is VME32BACKPLANE?
It is a passive backplane for standard IEEE-1014 VME32 bus crate, connecting all VME modules inside the chassis.
Q. Can VME64 boards run on this VME32 backplane?
Yes, VME64 modules are backward compatible and can operate in VME32 mode on this backplane.
Q. Is this active or passive backplane?
Passive backplane, no active logic chips; only PCB traces and termination resistors.
Q. What is the difference between VME32 and VME64x backplane?
VME32 uses J1/J2 96pin connectors; VME64x uses enhanced 160pin connectors and supports higher speed MBLT / 2eVME.
Q. Does slot count matter for replacement?
Yes, slot quantity must match the original crate; slot 1 is dedicated for system controller board.
Q. Are units tested before shipment?
All VME32BACKPLANE are continuity and signal integrity tested. Test report can be provided upon request, standard warranty is 12 months.
Need VME32BACKPLANE spare for your VME crate?
Send us slot quantity and crate dimension, we will verify compatibility and quote price and lead time quickly.



