Kongsberg Maritime | RSER200-4 603444 Serial Interface Module
Kongsberg RSER200-4 603444 4-channel Serial Communication Module
RIO200 series remote serial module for K-Chief 700 marine automation system, isolated RS232/422/485, NMEA 0183 · Marine control spare part
Product Overview
RSER200-4 (part number 603444) is a 4-channel isolated serial module of Kongsberg RIO200 family, designed for K-Chief 700 marine automation and monitoring system. It connects serial peripheral devices to RCU remote controller unit, supports RS232, RS422, RS485 and NMEA 0183 protocol. Each channel is independently configurable with galvanic isolation. It has three RJ45 ports for connection to redundant A/B/C controllers and a USB service port for local commissioning. It is DNV, ABS, BV marine type approved, widely used on vessel, offshore platform for navigation sensor, weather station, AIS, flow computer and serial instrument data acquisition.

DIN rail rack mounting, front LED status indicators, powered via RBUS backplane bus, marine temperature range -15℃ ~ +70℃, non-condensing humidity up to 95%.
Part Number
RSER200-4 / 603444
Brand / Series
Kongsberg RIO200
Serial Channels
4 isolated channels
Protocols
RS232/422/485, NMEA 0183
System Compatibility
K-Chief 700
Certification
DNV, ABS, BV Marine Approved
Key Features
Four Independent Galvanic Isolated Serial Ports
Each channel can be individually set to RS232, RS422 or RS485, baud rate 300 bps ~ 115200 bps, supports NMEA 0183 navigation data.
Redundant Controller Connection
3 RJ45 ports for A/B/C RCU controllers, supports single or redundant control architecture for high availability marine system.
USB Service Interface
USB 2.0 full speed port for local configuration, firmware upgrade and diagnostic test on site.
Marine Grade Environmental Performance
Operating temperature -15℃ ~ +70℃, anti-vibration, anti-humidity, suitable for ship engine room and offshore cabinet.
Front Diagnostic LED
LED indicators for module status, power, communication Tx/Rx activity of each serial channel for quick troubleshooting.
RBUS Backplane Powered
Power supply from RIO200 rack RBUS bus, no separate external DC power wiring required for module.
Marine Type Approval
Certified by DNV, ABS, BV, GL, compliant with vessel automation and safety monitoring requirements.
Typical Applications
Serial gateway for Kongsberg K-Chief 700 marine automation system.
Ship Navigation Sensors
GPS, gyrocompass, wind weather sensor, AIS NMEA data collection.
Offshore Platform Automation
Serial flow computer, pressure/totalizer, analyzer interface to K-Chief.
Vessel Machinery Monitoring
Engine monitoring system, shaft power meter, serial alarm instruments.
Marine Retrofit & Upgrade
Add serial communication ports for existing K-Chief 700 system expansion.
Dynamic Positioning Support
Serial navigation and environmental data feed for DP control system.
Ship Spare Stock
Critical spare for vessel survey, maintenance and emergency replacement.
Frequently Asked Questions
What is RSER200-4 603444?
It is Kongsberg RIO200 four-channel isolated serial communication module for K-Chief 700 marine automation system.
Is it compatible with other Kongsberg systems?
Mainly designed for K-Chief 700, not compatible with older K-Chief 500 or other non-RIO200 racks.
Can channels run different interface types at the same time?
Yes, each channel can be independently configured as RS232, RS422 or RS485.
Does it support NMEA 0183?
Yes, widely used for marine GPS, compass, weather sensor NMEA signal acquisition.
What documents can be supplied?
COO, MTC, factory test report, datasheet, marine type approval certificate, user manual.
What to confirm before quotation?
New / refurbished, firmware version, rack revision, marine certificate requirement, delivery term.