KIMI Phone:+86 18059884790      中文版
KONGSBERG
Kongsberg RDIOR400 600950 Marine Remote I/O Module
  • Warehouse: Spot
  • Warranty: 365 days
  • Quality: Original module
  • Condition: New
  • Shipping method: Courier delivery

  • Contact person: LI MING
  • Contact number: +86 18059884790
  • WeChat:18059884790
  • E-mail: plc66@qq.com

Product Description
Kongsberg  |  RMP400 Remote Multi-Purpose I/O Unit

Kongsberg RDIOR400 600950 Marine Remote I/O Module

K-Chief compatible marine I/O controller, RBUS communication, ship engine room & DP system field acquisition  ·  Spare part for vessel automation retrofit

Product Overview

603129 is the Kongsberg RMP400 remote multi-purpose I/O unit, a marine-grade field I/O module for Kongsberg K-Chief vessel monitoring and control systems. It collects mixed digital, analog, frequency and pulse signals from engine room, pump room, deck machinery and DP related sensors, executes local output control, and communicates back to the main controller via isolated RBUS RS485 bus. It supports bus redundancy, built-in channel diagnostics, and complies with marine classification standards, widely used for cargo ships, offshore platforms, FPSO and dynamic positioning system spare replacement.

image.png

Common revisions: Rev 2.1.0, Rev 2.3.0, Rev D1. DIN rail mounting, marine wide DC power supply, designed for high vibration and humid cabin environment.

Part Number
RMP400 603129
Brand / System
Kongsberg K-Chief
Communication
RBUS Isolated RS485
Power Supply
18–32 VDC Marine
Mounting
DIN Rail
Status
Legacy Marine Spare

Key Features

Mixed Multi-Function I/O Channels
Supports DI, DO, AI, AO, pulse and frequency signals, compatible with 4–20mA transmitters, proximity switches, speed pickups and valve actuators.
Redundant RBUS Fieldbus
Isolated RS485 RBUS interface, support redundant bus wiring, long transmission distance up to 1200m, anti-interference for marine cabin noise.
Full Channel Diagnostic Function
Onboard detection for wire break, short circuit, overvoltage and power failure; LED indicators for power, bus status and individual channel fault.
Marine Vibration & Humidity Resistance
Marine qualified design, anti-vibration, suitable for continuous operation in engine room, pump room and offshore skid cabinets.
Native K-Chief Integration
Seamless connection with Kongsberg K-Chief 500 / K-Chief 600 vessel monitoring and alarm system, no extra gateway required.
DIN Rail Quick Installation
Standard DIN rail clip mounting, easy hot swap spare replacement during vessel dry dock or on-board maintenance.
Multiple Hardware Revisions Available
Rev 2.1.0, Rev 2.3.0, Rev D1; verify revision number before ordering to match existing K-Chief software version.

Typical Applications

Field remote I/O for Kongsberg marine automation & vessel monitoring system.
Ship Engine Room Monitoring
Main engine, generator, lube oil, cooling water pressure and temperature acquisition.
Dynamic Positioning DP System
Thruster feedback, valve pack and position sensor signal collection.
Pump & Valve Control Skid
Ballast pump, fire pump, hydraulic valve remote control and status feedback.
Offshore Platform & FPSO
Process monitoring, utility system and safety interlock I/O.
Deck Machinery Automation
Crane, winch and anchor equipment status monitoring and local control.
Vessel Retrofit & Dry Dock Spare
Direct replacement for failed RMP400 on existing K-Chief vessels.

Frequently Asked Questions

Which system does RMP400 603129 belong to?
It is part of Kongsberg K-Chief marine monitoring and alarm system, communicating via RBUS bus.
Is revision important for replacement?
Yes. Rev must match K-Chief firmware; wrong revision will cause communication failure or channel malfunction.
Does it support Modbus?
No, native protocol is Kongsberg RBUS; not compatible with standard Modbus RTU/TCP without gateway.
Can it be used for land industrial automation?
Technically usable, but it is marine-certified, mainly stocked for ship and offshore spare market.
What certificates are available?
COO, MTC, marine test report, inspection certificate, DNV/ABS related document upon request.
What to confirm before quotation?
Hardware revision, new / refurbished, test report, marine certificate requirement, delivery term.


Related recommendations