KIMI Phone:+86 18059884790      中文版
REXROTH
Bosch Rexroth VT-VSPA1-11-1X/V0/0 (R901152637) Proportional Valve Amplifier Card
  • Warehouse: Spot
  • Warranty: 365 days
  • Quality: Original module
  • Condition: New
  • Shipping method: Courier delivery

  • Contact person: LI MING
  • Contact number: +86 18059884790
  • WeChat:18059884790
  • E-mail: plc66@qq.com

Product Description

Bosch Rexroth VT-VSPA1-11-1X/V0/0 (R901152637) Proportional Valve Amplifier Card

Product Brief Description

The Bosch Rexroth VT-VSPA1-11-1X/V0/0 is a Eurocard-format proportional pressure valve amplifier board. It converts analog command signals into regulated solenoid current for Rexroth single-solenoid proportional pressure valves such as ZDRE, DREM and ZDBE series, delivering stable hydraulic pressure control without position feedback.

image.png

Product Functions

  • Dual configurable input: 0–10 V differential voltage or 4–20 mA current signal
  • Independent adjustable ramp-up and ramp-down time for smooth pressure transition
  • Clocked current output stage with closed-loop solenoid current regulation
  • Built-in characteristic curve generator for linear pressure response tuning via jumpers
  • Solenoid cable break detection and short-circuit protection with fault LED indication
  • Reverse polarity protection and overtemperature shutdown for circuit safety
  • Ready status output and actual current monitoring signal for diagnostic check

Application Scenarios

  • Hydraulic press and injection molding machine pressure control
  • Metallurgical rolling mill and continuous casting hydraulic stations
  • Material handling and lifting equipment proportional hydraulic systems
  • Test bench hydraulic loading and pressure simulation systems
  • Machine tool hydraulic power unit pressure regulation

Frequently Asked Questions

Q1: What valves can VT-VSPA1-11-1X/V0/0 drive?

A1: It is designed for Rexroth single-solenoid proportional pressure valves including ZDRE, DREM and ZDBE series.

Q2: What input signal types does it support?

A2: It supports 0–10 V voltage input and 4–20 mA current input, selectable by configuration.

Q3: Does it detect wire faults on the solenoid side?

A3: Yes, it detects solenoid cable break and short circuit, and reports faults via front LED and ready signal.

Q4: Is this amplifier for closed-loop position control valves?

A4: No, it is for proportional pressure valves without electrical position feedback.


Related recommendations