Bently Nevada 60R/INP01 Dynamic Input Module

Product Description

The 60R/INP01 is a multi-channel dynamic input module for the Bently Nevada Orbit 60R machinery protection and condition monitoring platform. It acquires and conditions dynamic signals from proximity probes, accelerometers, velocity sensors and keyphasor transducers, converts analog sensor signals into high-resolution digital data, then sends measurement data to the 60R/PPM01 protection processor for alarm, trip and diagnostic calculation. It is the core signal acquisition card for vibration, shaft displacement and rotational speed monitoring.

Features

• Part No: 60R/INP01, Brand: Bently Nevada (Baker Hughes)
• 4-channel dynamic input, supports proximity, velocity, acceleration and keyphasor signals
• Built-in sensor power supply, transducer signal conditioning and anti-aliasing filtering
• High-speed sampling for vibration spectrum, orbit, gap and phase data capture
• Supports positive / negative input variants for different probe wiring requirements
• SIL2 capable, ATEX/IECEx certified for hazardous area deployment
• Single slot form factor for 60R/CHA chassis, hot-swappable
• Front panel OK and LINK status LED indicators
• Works together with 60R/PPM01, 60R/SIM01, 60R/CMM01 in the same rack
• Built-in sensor health check: cable break, short circuit and transducer fault detection

Applications

• Gas turbine, steam turbine, centrifugal compressor, pump vibration & shaft displacement monitoring
• Power plant, oil & gas, refinery critical rotating machinery protection rack
• Keyphasor, speed and phase measurement for rotating equipment
• Orbit 60 new project construction and spare replacement
• Upgrade retrofit from legacy 3500 series monitoring systems

FAQ

Q: What is the difference between 60R/INP01 and 60R/INP06?
A: 60R/INP01 is standard dynamic input module for general rotating machinery; 60R/INP06 is optimized for high-speed shaft keyphasor applications above 12000 rpm.

Q: Can it work without 60R/PPM01?
A: It can acquire raw signals but cannot execute protection logic, alarm or trip functions without the PPM01 processor module.

Q: Is this module active or discontinued?
A: Orbit 60 series is Bently Nevada’s current machinery protection platform, still available for new orders and spare supply.

Q: What sensors can it connect to?
A: Proximity probes, velocity transducers, accelerometers and keyphasor sensors compatible with Bently standard interface.