KIMI Phone:+86 18059884790      中文版
YOKOGAWA
Yokogawa AFV30D‑A41262 Duplexed Field Control Unit
  • Warehouse: Spot
  • Warranty: 365 days
  • Quality: Original module
  • Condition: New
  • Shipping method: Courier delivery

  • Contact person: LI MING
  • Contact number: +86 18059884790
  • WeChat:18059884790
  • E-mail: plc66@qq.com

Product Description

AFV30D‑A41262 Yokogawa Duplexed Field Control Unit

Product Description

AFV30D‑A41262 is a duplexed redundant Field Control Unit (FCU) manufactured by Yokogawa, designed for the CENTUM VP distributed control system. It adopts an active‑standby dual‑processor hot‑backup architecture with dual‑redundant Vnet/IP communication and dual power supply. This 19‑inch rack‑mounted controller executes real‑time process control and connects with FIO field I/O modules, HIS operator stations and engineering stations, delivering high availability for continuous process plants.

image.png

Product Functions

  • Real‑time execution of continuous control, sequence control and interlock logic
  • Automatic hot switchover between active and standby processors without system interruption
  • High‑speed data exchange via redundant Vnet/IP with I/O modules and HMI stations
  • Field device signal acquisition, PID regulation and output control calculation
  • Built‑in hardware and self‑diagnosis for fault detection and alarm reporting
  • Historical trend data and event logging for process tracking and analysis

Application Scenarios

  • Petrochemical, oil refining and natural gas processing plants
  • Thermal power, combined‑cycle power plant boiler and turbine control systems
  • Pharmaceutical, fine chemical and food continuous production lines
  • Water treatment, sewage disposal and pipeline monitoring systems
  • Large‑scale process automation requiring non‑stop DCS operation

Common Problems

  • Redundancy synchronization failure: Caused by sync cable aging, loose connection or inconsistent firmware versions of two processors.
  • Vnet/IP communication interruption: Damaged network cable, switch fault or unstable network signal interference.
  • Controller frequent switchover: Poor cooling ventilation, overheating or unstable 24V DC power supply.
  • I/O data loss or abnormal control output: FIO bus failure, terminal contact oxidation or configuration download error.
  • Self‑diagnosis alarm without shutdown: Component aging, fan degradation or internal hardware partial failure.


Related recommendations