KIMI Phone:+86 18059884790      中文版
HONEYWEL
Honeywell MC-PHAI01 51403479-150 High-Level Analog Input Module with HART
  • Warehouse: Spot
  • Warranty: 365 days
  • Quality: Original module
  • Condition: New
  • Shipping method: Courier delivery

  • Contact person: LI MING
  • Contact number: +86 18059884790
  • WeChat:18059884790
  • E-mail: plc66@qq.com

Product Description

Honeywell Process Control I/O

Honeywell MC-PHAI01 51403479-150 High-Level Analog Input Module with HART

16-Channel 4–20 mA Analog Input | HART Digital Communication | TDC 3000 / TPS / Experion PKS Compatible

Product Overview

The Honeywell MC-PHAI01 (order code 51403479-150) is a high-level analog input module engineered for the I/O subsystem of Honeywell process automation platforms, including TDC 3000, TotalPlant Solution (TPS) and Experion PKS installations. The module conditions and digitizes field signals from transmitters, transducers and analyzers, then delivers them to the controller over the I/O link for regulatory control, operator display and historical archiving.

image.png

Each card provides multi-channel 4–20 mA current input with 16-bit A/D conversion and channel-level isolation, so a single fault in the field loop does not disturb neighbouring points. Integrated HART capability lets the system read secondary variables and device diagnostics from smart transmitters without an additional multiplexer, enabling on-line instrument verification, calibration checks and predictive maintenance while the loop stays in service. The card is designed for hot-swap replacement in redundant I/O configurations, keeping commissioning fast and plant downtime short.

Input Signal

4–20 mA / 1–5 V high-level analog

Resolution

16-bit A/D conversion

Protocol

HART superimposed on 4–20 mA

Isolation

Channel-to-channel and system

Key Functions

High-level analog acquisition. Receives 4–20 mA and 1–5 V field signals from pressure, temperature, flow, level and analytical transmitters, then converts them into engineering-unit values in the controller with 16-bit resolution for accurate loop control.

HART digital communication. Passes HART frequency-shift signals transparently, allowing the control system or a handheld configurator to access PV/SV/TV and device status, so smart transmitters can be reconfigured and verified from the operator station without breaking the current loop.

Channel isolation and fault containment. Galvanic separation between channels and between field wiring and system ground prevents ground-loop error and cross-channel disturbance, and confines a shorted or open loop to a single point.

Signal conditioning and diagnostics. Performs filtering, ranging, open-circuit and out-of-range detection, and reports channel-level fault status to the controller for alarm annunciation and maintenance work-order generation.

Redundant / hot-swap operation. Supports redundant I/O pair configuration and on-line card replacement, so a module can be changed out during operation while the redundant partner maintains data integrity.

Application Scenarios

Refining & Petrochemical

Collecting flow, pressure, level and temperature inputs on distillation columns, reactors and hydrocrackers, where HART diagnostics support instrument health monitoring in hazardous-area loops.

Chemical & Specialty Plants

Batch and continuous process control needing high point density, per-channel isolation and re-ranging of smart transmitters during product changeovers.

Power Generation & Utilities

Boiler, turbine auxiliaries and water-treatment loops where continuous analog trending and redundant I/O are required for availability and grid-load following.

Legacy System Migration & Spares

Sustaining TDC 3000 and TPS systems still in service; the module is the common replacement choice for maintenance spares and phased migration projects without full DCS replacement.

Metals, Pulp & Paper, Mining

Continuous-process lines with heavy electrical noise, where channel isolation and filtering preserve measurement stability on drives, kilns and digesters.

O&G Upstream & Pipelines

Wellhead, separator and compressor-station instrumentation, including remote installations where HART device data reduces site visits.

Frequently Asked Questions

Q1: Which Honeywell systems is the MC-PHAI01 51403479-150 compatible with?

It is designed for Honeywell process control I/O families used in TDC 3000, TotalPlant Solution (TPS) and Experion PKS architectures. Compatibility depends on the specific I/O card file, terminal board and system release installed, so please confirm the exact system model and I/O slot with us before ordering.

Q2: What input signals does the module accept?

It accepts high-level analog current signals (4–20 mA) and voltage signals (1–5 V) from two-wire or four-wire transmitters, with 16-bit A/D conversion and per-channel isolation. Signal ranges are configured in the control system rather than by hardware jumpers.

Q3: Does the HART function require a separate HART multiplexer?

No. The card passes HART signals on the analog loop, so HART-capable systems can read device variables and diagnostics directly. Where the installed system release does not process HART data, the loop still operates normally as a standard 4–20 mA input.

Q4: Is the module new, refurbished or used?

Stock varies. We supply factory-sealed new units as well as tested refurbished units depending on availability, and each item is labelled with its actual condition. Please state your preferred condition when requesting a quotation.

Q5: What documents can be supplied with the module?

On request we provide a commercial invoice, packing list, certificate of origin and, where applicable, test reports or calibration records. Please specify the documents your customs clearance or quality system requires when placing the order.

Q6: How should the module be installed and handled?

Installation must follow the Honeywell system manual for the specific I/O family: correct slot assignment, matching terminal board, field wiring per the loop drawings, and ESD-safe handling. Power down the card file unless a redundant configuration permits on-line replacement. Only qualified instrument technicians should perform the swap.

Need pricing, lead time or a cross-reference check for MC-PHAI01 51403479-150?

Send us your target quantity, required condition and system model — we will reply with availability and a formal quotation.


Related recommendations