KIMI Phone:+86 18059884790      中文版
KONGSBERG
KONECRANES DMCS022F10PN0 2.2KW Crane Hoist Variable Frequency Drive
  • Warehouse: Spot
  • Warranty: 365 days
  • Quality: Original module
  • Condition: New
  • Shipping method: Courier delivery

  • Contact person: LI MING
  • Contact number: +86 18059884790
  • WeChat:18059884790
  • E-mail: plc66@qq.com

Product Description
KONECRANES (KCI)  ·  DMCS022F10PN0 Dynadrive Crane Hoist Inverter

DMCS022F10PN0 2.2KW Crane Hoist Variable Frequency Drive

SKU: DMCS022F10PN0  |  Dynadrive DMCS series  |  380–480VAC  |  Hoist dedicated vector drive  |  Finland origin
Core Application
Konecranes / SWF hoist lifting mechanism
     Rating
2.2kW / 3HP, 380–480V three-phase
     Control Mode
Closed loop vector, hoist torque control
     Status
Original crane spare, discontinued series

The DMCS022F10PN0 is Konecranes Dynadrive DMCS series dedicated hoist inverter, widely known as KCI DMCS022F10PN0. It is a high-performance vector drive specially developed for overhead crane hoist motors, with built-in brake chopper, anti-sway, load torque monitoring and lifting safety interlock logic. It delivers stable low-speed torque and prevents load slipping during lifting/lowering. It is factory-programmed for Konecranes and SWF wire rope hoists, not a general-purpose VFD. Direct replacement for matching hoist units; parameter copy and commissioning required after swap.

Typical deployment: Konecranes workstation cranes, SWF electric hoists, monorail lifting systems, industrial workshop overhead travelling crane hoist axis control.

image.png

Product Features

Hoist-Specific Vector Control
High torque at zero/low speed, anti-drop protection for suspended loads.
Built-in Brake Chopper
Handles regenerative energy during load lowering, matched with crane brake resistor.
Lifting Safety Logic
Overload monitoring, overspeed protection, brake interlock and fault lockout.
Transparent Plastic Housing
Original Konecranes Dynadrive casing, status LED visible for quick fault diagnosis.
Factory Hoist Parameter Set
Preloaded for SWF / Konecranes hoist motor curves, not universal pump/fan drive.
380–480V Three Phase Input
Industrial standard crane power supply, 0–120Hz output frequency range.
Crane Communication & IO
Digital IO for brake, limit switches, enable and crane master controller link.
Critical Hoist Spare Part
Drive failure locks hoist, blocks lifting operation; stock spare for crane maintenance.

Application Scenarios

Konecranes & SWF Wire Rope Hoists
Workstation crane, monorail hoist lifting axis control.
Overhead Travelling Crane Hoist
Factory overhead crane, low speed lifting with suspended payload.
Material Handling & Workshop Lifting
Machinery, steel, warehouse, assembly station lifting equipment.
Crane Retrofit & Replacement
Direct replacement for failed DMCS022F10PN0 hoist drives on existing KCI crane systems.
Preventive Maintenance Spare Stock
Crane service company spare inventory for emergency hoist breakdown.
Hoist Axis Safety Critical Control
Load holding, brake coordination and lifting limit protection loop.

Frequently Asked Questions

Q: What is DMCS022F10PN0?
A: Konecranes Dynadrive DMCS series 2.2kW hoist dedicated inverter for SWF / KCI crane hoist systems.
Q: Can it be used as general-purpose VFD for pump or conveyor?
A: Not recommended. Firmware and logic are locked for hoist lifting safety sequence; general-purpose parameters are not applicable.
Q: What is the difference between PN0 and TN0 suffix?
A: Different firmware, IO definition and hoist motor configuration; not plug-and-play interchangeable without commissioning.
Q: Does it require external brake resistor?
A: Yes, the internal brake chopper must pair with matched crane braking resistor for lowering regenerative load.
Q: Why transparent cover design?
A: For visual LED status check without opening the enclosure, convenient for crane on-site fault troubleshooting.
Q: Is this model still in active production?
A: This DMCS series is discontinued; only new surplus, refurbished and used replacement stock available.
Q: How to confirm compatibility before ordering?
A: Confirm crane brand, hoist model, existing drive suffix, hoist motor rating and brake resistor specification.


Related recommendations