BENDER | IRDH575B1-435 ISOMETER Insulation Monitoring Device
BENDER IRDH575B1-435 Insulation Monitor for IT System
ISOMETER® insulation monitoring relay, for unearthed 3(N)AC / AC/DC / DC IT systems, compatible with EDS fault location system · Electrical safety spare part
Product Overview
IRDH575B1-435 is a BENDER ISOMETER® digital insulation monitoring device (IMD) for unearthed IT power systems. It continuously measures insulation resistance between live conductors and earth, provides two-stage adjustable insulation alarm, and acts as master controller for EDS460/EDS461 insulation fault locators. It covers 20–575V AC/DC systems, widely used for marine, offshore, medical, mining, industrial converter and variable frequency drive power distribution. It features backlit text display, opto-isolated RS485, 4-20mA analog output and three relay alarm contacts.

Panel flush mounting, built-in test generator, fault event logging with timestamp, compliant with IEC 61557-8, DNV, ABS marine approvals.
Brand / Series
BENDER IRDH575 ISOMETER
Monitored Voltage
AC/DC 20…575V
Supply Voltage
AC 88–264V / DC 77–286V
Communication
RS485 BMS / 4-20mA
Certifications
IEC61557-8, DNV, ABS
Key Features
Universal IT System Monitoring
Supports 3(N)AC, single-phase AC, DC and mixed AC/DC unearthed systems, suitable for drives and converter loads.
Two Independent Adjustable Alarm Thresholds
Insulation response range 1kΩ–10MΩ; alarm 1 for pre-warning, alarm 2 for main fault, relay contact NO/NC configurable.
EDS Fault Location Master Controller
Works with EDS460 / EDS461 to locate insulation fault branch, reduces downtime for marine and industrial power systems.
Rich Interfaces
Opto-isolated RS485 BMS protocol, 4-20mA analog output for DCS, three change-over relay contacts for alarm and device fault.
Backlit Text Display & Event Log
4×16 character plain text display, stores up to 99 timestamped fault records for maintenance traceability.
Wide Operating Temperature
-20°C ~ +55°C, high immunity for engine room, offshore cabinet and heavy industrial environment.
Panel Mount Installation
Standard cut-out panel flush mounting, front panel with membrane keys for local setting, test and reset.
Typical Applications
Insulation monitoring for unearthed IT power distribution systems.
Marine Vessel & Offshore Platform
Ship IT power network, DP system, engine room power distribution, DNV approved.
Mining & Tunnel Power Supply
Ungrounded underground distribution to avoid shutdown from single earth fault.
Medical Isolated Power System
Operation room and ICU IT supply insulation supervision.
Industrial VFD & Converter Drives
Frequency converter, rectifier and DC drive unearthed power monitoring.
Renewable Energy & Energy Storage
Off-grid inverter and battery DC IT system insulation monitoring.
System Retrofit & Spare Stock
Replacement for existing IRDH575 series insulation monitoring panels.
Frequently Asked Questions
What is IRDH575B1-435?
It is BENDER ISOMETER® insulation monitoring device for 20–575V unearthed IT AC/DC systems, supports EDS fault location.
Difference between B1-435 and B2-435?
B1-435: 20–575V; B2-435: 340–760V for higher voltage IT systems.
Can it work with EDS460?
Yes, IRDH575 acts as master, EDS460/461 locates which branch has insulation fault.
Is it suitable for marine?
Yes, DNV and ABS marine approved, widely used on vessels and offshore platforms.
What documents can be supplied?
COO, MTC, factory test report, datasheet, operation manual, marine type approval certificate copy.
What to confirm before quotation?
New / refurbished, firmware version, EDS system requirement, marine certificate requirement, delivery term.