CCC (Compressor Controls Corporation) | MPU-1004 Vanguard Main Processor Module
CCC MPU-1004 Vanguard Series 5 Main Processor Card
Turbomachinery control CPU for Vanguard S5 compressor control system, duplex redundant support, anti-surge & speed control · Oil & gas turbomachinery spare part
Product Overview
MPU-1004 is the main processor module of CCC Vanguard Series 5 compressor control platform, widely used for centrifugal compressor anti-surge control, speed regulation, load sharing and turbine control. It supports simplex or duplex redundant architecture, executes high-speed real-time control algorithms for critical turbomachinery. It communicates with I/O cards, HMI and DCS via backplane and Ethernet. It is a legacy core card, can be upgraded to MPU-1004P for Prodigy S5P migration. It is commonly deployed in natural gas pipeline, refinery, LNG and petrochemical compressor packages.

Rack-mounted hot-swap design, front status LEDs, Achilles cybersecurity certified, CE, UL, CSA approved for hazardous industrial area.
Brand / Series
CCC Vanguard Series 5
Function
Compressor Main Processor
Redundancy
Duplex redundant capable
Upgrade Option
MPU-1004P (Prodigy)
Certifications
CE, UL, CSA, Achilles L1
Key Features
High-Speed Turbomachinery Control
Built-in anti-surge, speed control, capacity control and load sharing algorithms for centrifugal compressors and steam/gas turbines.
Duplex Redundant Operation
Supports hot standby dual CPU configuration, bumpless switchover to avoid compressor trip during processor failure.
Hot-Swap Rack Installation
Can be replaced online without shutting down the whole compressor control rack, minimizing downtime for maintenance.
Multiple Communication Interfaces
Backplane bus for local I/O modules, Ethernet for DCS, HMI and historian, serial ports for auxiliary instruments.
Front Diagnostic LEDs
Clear status indicators for power, run, fault, sync and communication link for fast site troubleshooting.
Legacy Vanguard S5 Platform
Original core CPU for Series 5; field upgradeable to MPU-1004P to run Prodigy S5P OS with enhanced security and performance.
Industrial Cybersecurity Ready
Achilles Level 1 certified, suitable for critical oil & gas and petrochemical compressor control packages.
Typical Applications
Main control CPU for CCC Vanguard compressor and turbine control systems.
Refinery & Petrochemical Compressors
Anti-surge control for hydrogen, ethylene, propylene centrifugal compressors.
Natural Gas Pipeline & Storage
Gas transmission compressor station speed and surge protection control.
LNG & Gas Processing Plant
Mixed refrigerant, boil-off gas compressor control package.
Steam & Gas Turbine Control
Turbine speed governor, generator drive and mechanical protection logic.
Vanguard S5 System Upgrade & Retrofit
Spare or upgrade path to MPU-1004P Prodigy S5P for legacy sites.
Critical Turbomachinery Spare Stock
Emergency spare for compressor package outage and planned turnaround.
Frequently Asked Questions
What is CCC MPU-1004?
It is the Vanguard Series 5 main processor CPU for CCC turbomachinery compressor anti-surge and speed control system.
Is MPU-1004 the same as MPU-1004P?
MPU-1004 is original S5 firmware; MPU-1004P is upgraded version running Prodigy S5P operating system, higher performance and security.
Does it support duplex redundant?
Yes, designed for dual redundant hot standby with bumpless transfer when one CPU fails.
Can it control anti-surge alone?
Yes, anti-surge is its core algorithm, commonly paired with speed control for compressor packages.
What documents can be supplied?
COO, MTC, factory test report, datasheet, user manual, calibration certificate, Achilles certificate copy.
What to confirm before quotation?
New / refurbished, firmware version, simplex or duplex requirement, rack revision, test report requirement, delivery term.