KIMI Phone:+86 18059884790      中文版
EMERSON
Emerson VE4006P2 DeltaV M-series Serial Interface Series 2
  • Warehouse: Spot
  • Warranty: 365 days
  • Quality: Original module
  • Condition: New
  • Shipping method: Courier delivery

  • Contact person: LI MING
  • Contact number: +86 18059884790
  • WeChat:18059884790
  • E-mail: plc66@qq.com

Product Description
Emerson  |  VE4006P2 Serial Interface Card

Emerson VE4006P2 DeltaV M-series Serial Interface Series 2

DeltaV DCS M-series serial communication module, RS232/RS485, Modbus RTU/ASCII, hot-swappable  ·  Process control system spare

Product Overview

VE4006P2 is Emerson DeltaV M-series Series 2 serial interface card, also known as KJ3241X1-BA1. It acts as a bridge between DeltaV DCS and third-party serial devices, supporting RS232, RS422, RS485, preloaded Modbus RTU/ASCII driver. Each port can be set as master or slave, baud rate up to 115200 bps. It supports hot swap, online addition without controller shutdown, directly installed on DeltaV M-series I/O carrier. Widely used to connect analyzers, flow computers, VFDs, meters and old serial instruments in chemical, oil & gas, power plant DCS retrofit projects.

image.png

Comes with terminal block, front LED indicators for power, fault and port status, CE, UL, ATEX Zone 2 certification, wide temperature range for cabinet installation.

Part Number
VE4006P2 (KJ3241X1-BA1)
Brand / Series
Emerson DeltaV M-series
Ports
2 configurable serial ports
Protocols
Modbus RTU / ASCII
Power
12VDC LocalBus, 300mA
Feature
Hot-swappable

Key Features

Multi-interface Serial Communication
Each port software selectable for RS232, RS422, RS485 half-duplex or full-duplex, supports master/slave mode.
Preloaded Modbus Driver
Built-in Modbus RTU and ASCII, read coils, discrete inputs, holding registers, input registers for control module mapping.
Hot Swap & Online Add
Can be inserted or replaced while DeltaV controller and I/O rack are running, no system shutdown required for maintenance.
Front Diagnostic LEDs
LEDs indicate power status, module fault, transmit/receive activity for each serial port for quick troubleshooting.
Wide Operating Temperature
-40℃ ~ +70℃, suitable for unconditioned industrial control cabinet, hazardous area Zone 2 approved.
Native DeltaV Integration
Configured via DeltaV Control Studio, serial data directly referenced as analog or discrete tags in control strategy.
Isolated Serial Channels
Galvanic isolation between serial field side and DeltaV backplane bus, suppresses ground loop and EMI interference.

Typical Applications

Serial gateway for DeltaV DCS to connect legacy serial field devices.
Oil & Gas Process Plant
Gas chromatograph, flow computer, pressure and flow totalizer integration.
Chemical DCS Retrofit
Connect old serial analyzers, density meters and third-party skid controllers.
Power Plant Auxiliary Control
VFD, power meter, UPS and boiler auxiliary serial device communication.
Water & Wastewater
Multi-parameter analyzers, sludge density meters and pump serial drives.
Process Skid OEM Package
Standard serial interface for compressor, separation and filtration skid delivered with DeltaV.
DeltaV System Spare Stock
Spare card for plant outage, emergency replacement and system expansion.

Frequently Asked Questions

What is VE4006P2?
It is Emerson DeltaV M-series Series 2 serial interface card, used to connect Modbus and other serial devices to DeltaV DCS.
Is it compatible with DeltaV M-series only?
Yes, it fits M-series I/O carrier, not compatible with S-series or CHARM I/O racks.
Can it run as Modbus master and slave at the same time?
Each port can be independently set master or slave, two ports can work in different modes simultaneously.
Does it support hot swap?
Yes, hot-swappable, online replacement without stopping the DeltaV controller.
What documents can be supplied?
COO, MTC, factory test report, datasheet, user manual, ATEX/UL certificate, configuration backup.
What to confirm before quotation?
New / refurbished, firmware version, rack revision, test report requirement, delivery term.


Related recommendations