Kongsberg | DSCB Digital Signal Control Board
Kongsberg DSCB-02 68494150 Digital Signal Control Board
K-Chief 500 / K-Chief 600 Marine Automation Control Module · Shipboard I/O & Signal Processing Card
Product Overview
The DSCB-02 68494150 is a Kongsberg digital signal control board for K-Chief marine automation system, widely deployed on cargo vessels, tankers, offshore units and workboats. It handles digital input, digital output and signal conditioning for engine room monitoring, alarm, valve control and auxiliary machinery interlock. It communicates via the K-Chief fieldbus network to process station and operator stations. It is a rack-mounted PCB card, designed for marine classification environments, with built-in surge protection and fault diagnosis for channel status. This is a common spare part for marine automation retrofit and breakdown replacement.

DSCB-02 is the upgraded version of DSCB-01; part number 68494150 is the fixed item number for this variant, compatible with K-Chief 500 and K-Chief 600 racks.
Part Number
DSCB-02 68494150
System Platform
K-Chief 500 / K-Chief 600
Function
Digital Signal Control
Communication
K-Chief Fieldbus
Mounting
Rack slot mounted
Certification
Marine Class Approved
Key Features
Digital I/O Signal Processing
Processes binary status signals from sensors, switches, limit contacts and outputs drive signals for solenoid valves, relays and alarm indicators.
Fieldbus Network Integration
Connects to the K-Chief redundant fieldbus, exchanges real-time status and control commands with central processing units and operator HMI stations.
Channel Self-Diagnosis
Detects open circuit, short circuit and board fault, reports fault codes to the alarm system for quick troubleshooting on board vessels.
Marine Environment Hardening
Anti-vibration, anti-shock, humidity and salt mist resistant design, compliant with marine classification society environmental requirements.
Hot Swap Capable
Supports hot swapping in the K-Chief rack under normal operation, reducing downtime during emergency board replacement on ships.
Interlock & Alarm Logic Support
Used for machinery safety interlock, bilge alarm, fire detection signal acquisition and auxiliary equipment sequence control.
Backward Compatibility
DSCB-02 replaces older DSCB-01 cards, check rack firmware version before replacement to avoid communication mismatch.
Typical Applications
Digital control I/O card for Kongsberg K-Chief marine monitoring and alarm systems.
Engine Room Alarm & Monitoring
Collect run/stop, fault and limit signals for main engine, generator and auxiliary machinery.
Ballast & Bilge Control System
Valve remote control, level switch input and pump interlock for ballast tanks.
Offshore Platform Automation
Auxiliary safety signal acquisition and local control for FPSO and offshore support vessels.
Fire & Gas Detection Interlock
Digital alarm signal handling and shutdown interlock for fire and gas panels.
Tanker Cargo Control Auxiliary
Cargo pump status, emergency stop and valve feedback signal processing.
Spare Replacement & Retrofit
Replacement for failed DSCB-01 / DSCB-02 cards on existing K-Chief vessels.
Frequently Asked Questions
What is the difference between DSCB-01 and DSCB-02?
DSCB-02 is the revised hardware version with improved circuit protection and diagnostic functions; firmware version must match the K-Chief system.
Can it be used for analog signals?
No, DSCB is digital signal board; analog measurement requires Kongsberg AIOB or AIB analog input/output cards.
Does it require configuration after replacement?
Normally the configuration is stored in the K-Chief CPU, hot swap usually does not need re-programming, but verify channel mapping after replacement.
What class certificates are available?
Typically DNV, LR, ABS marine type approval; confirm certificate requirement before ordering for vessel survey.
Is this board compatible with K-Chief 700?
K-Chief 700 uses newer hardware series; DSCB-02 68494150 is mainly for K-Chief 500 / 600 racks, check system documentation.
What to confirm before ordering?
Original board revision, rack firmware version, vessel class requirement, whether new/refurbished and test report.