AC 800M Communication interfaces 3BSE018103R1 (CI853K01)-YMGK Industrial Control

CI853 RS-232 module protocols:

COMLI can be used on the built-in COM3 port and optionally on the CI853 ports. The cable length can be extended considerably (to several km) using a fiber optic converter. RS-232C is the standard communication interface used for serial communication with COMLI. The CI853 supports Hot Swap. COMLI is an ABB protocol for data transmission between controllers. It is designed for asynchronous master/slave communication in half-duplex. COMLI protocol supports dial-up modems controlled from the application. CI853 supports both Master/Slave modes in COMLI.

MODBUS RTU is a standard protocol widely spread because of its ease of use and reliability. Modbus RTU is an open, serial (RS-232 or RS-485) protocol derived from the Master/Slave architecture exchanging information in half duplex mode. The Modbus functionality can be configured both on the COM ports of AC 800M and CI853. Module Redundancy is not available in MODBUS RTU. CI853 supports only Master mode in MODBUS RTU.

General info

Article number	3BSE018103R1 (CI853K01)
Communication protocol	COMLI and MODBUS RTU
Master or slave	Master/Slave
Number of channels	2
Transmission speed	75 - 19 200 b/s
Line redundancy	No
Module redundancy	No
Hot Swap	Yes
Used together with HI Controller	Yes

At YMGK, customer satisfaction is our top priority. Welcome to contact us at any time.

We will do our best to find the perfect solution that meets your industrial needs for you. Your success is our success

Bently, Triconex, Woodward, Foxboro, Westinghouse, Reliance, Schneider, Modicon, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAWA, Rexroth, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT, SIEMENS

Including a variety of discontinued products, you can send me inquiries (indicate the model, parameters, quantity, requirements you need)

News

Featured

Contact Us