KIMI Phone:+86 18059884790      中文版
GE
Home > GE
GE IS215WEPAH2BD WEPA Wind Energy Pitch Axis Control Board for Mark VIe
  • Warehouse: Spot
  • Warranty: 365 days
  • Quality: Original module
  • Condition: New
  • Shipping method: Courier delivery

  • Contact person: LI MING
  • Contact number: +86 18059884790
  • WeChat:18059884790
  • E-mail: plc66@qq.com

Product Description
GE SPEEDTRONIC  ·  IS215WEPAH2BD

IS215WEPAH2BD WEPA Wind Energy Pitch Axis Control Board for Mark VIe

SKU: IS215WEPAH2BD  |  Speedtronic Mark VIe  |  WEPA pitch axis controller board  |  USA origin  |  Discontinued OEM spare
Core Application
Wind turbine blade pitch control
     Type
WEPA pitch axis control board
     Power
125VDC
     Status
Manufacturer discontinued spare

The IS215WEPAH2BD is GE Speedtronic WEPA (Wind Energy Pitch Axis) control board for Mark VIe control system. It is dedicated to wind turbine pitch control, calculating blade pitch angle, driving pitch actuators, optimizing power capture and performing load & safety protection. It supports simplex and triple redundant TMR configurations, features multiple serial ports and 10BaseT Ethernet, runs control logic at 10/20/40ms frame rate. Conformal coated for wind farm cabinet harsh environment, widely used as critical MRO spare for onshore and offshore wind turbine Mark VIe racks.

Typical deployment: Onshore wind turbine control cabinet, offshore wind turbine unit, Mark VIe wind control rack, pitch actuator closed-loop control, wind farm redundant control system, overspeed and storm feathering protection.

image.png

Product Features

WEPA Dedicated Pitch Axis Control
Specialized for wind turbine blade pitch regulation, power optimization and storm feather protection.
Mark VIe System Compatible
Native IONet bus interface, fits standard Mark VIe wind control rack architecture.
Simplex / TMR Triple Redundancy Support
Can be deployed in single or 2oo3 voting redundant setup for high availability wind units.
Rich Communication Interfaces
3 COM serial ports + 10BaseT / AUI Ethernet for pitch drive and SCADA communication.
Selectable Control Frame Rate
10ms, 20ms, 40ms logic cycle to match different pitch actuator response requirements.
Conformal Coating Protection
Resist moisture, salt spray and dust, adapts to offshore and coastal wind farm environments.
Built-in Pitch Fault Diagnostics
Detects angle sensor error, actuator fault, communication loss and triggers safe feathering.
Legacy Wind MRO Spare
GE original production stopped; stock available as new surplus and tested refurbished units.

Application Scenarios

Onshore Wind Turbine Mark VIe Cabinet
Main pitch controller for land-based wind turbine units.
Offshore / Coastal Wind Turbine
Salt-mist resistant pitch control for offshore wind farm cabinets.
TMR Redundant Pitch Control System
Triple modular redundant pitch control for high-reliability wind turbines.
Pitch Actuator Closed-Loop Regulation
Real-time blade angle adjustment, power limiting and load reduction.
Emergency Feather & Overspeed Protection
Auto feathering under over-speed, fault or extreme wind condition.
Wind Farm MRO Replacement Spare
Direct replacement for failed IS215WEPAH2BD in running Mark VIe wind racks.

Frequently Asked Questions

Q: What is IS215WEPAH2BD?
A: GE Speedtronic WEPA wind energy pitch axis control board for Mark VIe wind turbine control systems.
Q: What is the difference between WEPA and AEBI?
A: WEPA (IS215WEPAH2BD) = dedicated pitch axis controller; AEBI (IS210AEBIH3B) = general renewable energy bridge gateway board.
Q: What happens if this board fails?
A: Pitch control is lost; system will trigger fault alarm and execute emergency feathering to stop the turbine.
Q: HS code for this item?
A: HS 853890, circuit board for industrial control equipment.
Q: How to confirm compatibility before ordering?
A: Confirm Mark VIe firmware version, rack architecture (simplex / TMR), IONet bus and existing board revision.


Related recommendations