ABB | Millmate Pressductor® Roll Force Circular Load Cell
ABB PFVL141C-20MN YM212003-AP Roll Force Load Cell
20MN Circular Magneto‑Elastic Pressductor Force Sensor for Steel Mill AGC System · Rolling Mill Stand Force Measurement
Product Overview
The PFVL141C-20MN YM212003-AP is an ABB Millmate series circular Pressductor® magneto‑elastic roll force load cell with 20 MN rated capacity, designed for heavy-duty hot rolling, cold rolling and plate mill stands. It measures total rolling force to feed the Automatic Gauge Control (AGC) loop for thickness regulation, roll gap control and mill overload protection. Unlike strain‑gauge cells, it uses ferromagnetic magneto‑elastic effect, solid one-piece ring structure with high shock and fatigue resistance. YM212003-AP is the drawing/item number for this specific variant. It is fully sealed, shielded and calibrated for interchangeability within the same force rating.

PFVL141C covers a wide force range from 1.6 MN up to 60 MN; this 20MN version is common for medium‑size rolling stands. It pairs with ABB Millmate signal processing units for force value output and diagnostics.
Part Number
PFVL141C-20MN YM212003-AP
Sensing Principle
Pressductor Magneto‑Elastic
Construction
Solid Circular Ring
Accuracy Class
±0.5 / ±1.0 % FS
Application
Rolling Mill AGC
Key Features
Pressductor® Magneto‑Elastic Technology
No delicate strain gauges; force changes magnetic permeability of the core, robust against heavy impact, overload and long‑term fatigue in mill stand environment.
Low‑Impedance High‑Output Signal
Less sensitive to insulation degradation; maintains specified accuracy even with insulation resistance down to 10 kΩ, suitable for hot, humid and dusty mill floors.
Calibrated Interchangeability
Same‑rating load cells are factory calibrated for direct swap; consistent output simplifies spare replacement and mill commissioning.
Fully Sealed & Electromagnetically Shielded
Integrated shielding and hermetic sealing suppress EMC interference from mill drives and high‑current equipment, stable AGC feedback.
Closed‑Loop AGC Core Measurement
Provides real rolling force feedback for strip thickness control, roll gap positioning, transient force monitoring and stand overload protection interlock.
Wide Force Range Platform
PFVL141C series covers 1.6 MN ~ 60 MN; 20MN is widely used in medium hot strip, plate and non‑ferrous rolling mills.
Millmate System Compatibility
Matched with ABB Millmate force processing units to convert raw sensor signal into 4‑20mA, digital bus or display values for mill control system.
Typical Applications
Roll force measurement sensor for metal rolling mill AGC control systems.
Hot Strip Rolling Mills
Force feedback for thickness AGC, rolling schedule control and stand overload protection.
Plate & Heavy Plate Mills
Thick plate rolling force monitoring and pass‑by‑pass force recording.
Non‑Ferrous Metal Rolling
Aluminum, copper and brass cold rolling mill stand force measurement.
Section & Profile Rolling Mills
Rebar, wire rod and profile mill stand force monitoring and safety interlock.
Mill Stand Retrofit & Spare
Replacement for existing PFVL141C‑20MN cells in running AGC control loops.
Rolling Process R&D & Logging
Rolling force data logging for process tuning, wear analysis and mill condition monitoring.
Frequently Asked Questions
What is Pressductor® technology?
It is ABB’s magneto‑elastic force sensing principle: applied force changes magnetic permeability of the ferromagnetic core, producing proportional electrical output, no bonded strain foils.
What is the difference between PFVL141C and PFVL141V?
PFVL141C is circular ring type, installed under mill housing; PFVL141V is block/rectangular style for different stand mounting layout.
Does it output 4‑20mA directly?
No, raw sensor signal needs ABB Millmate signal conditioner unit to convert to analog or digital signals for PLC / AGC controller.
Can I replace it with a different MN rating?
Not recommended without re‑scaling AGC logic; rated force must match original mill stand design and force calculation range.
What documents are usually supplied?
Factory calibration certificate, test report, dimensional drawing, COO, and Millmate system installation manual.
What to confirm before ordering?
Full part number including YM drawing suffix, original mounting dimension, accuracy class, calibration certificate requirement, new or refurbished condition.