Honeywell | DCS Analog Output Module
Honeywell ADA232 029.202426 Analog Output Module
TDC 3000 / LCN System Component · Control Analog Output Card
Product Overview
The ADA232 029.202426 is a Honeywell analog output module for TDC3000 LCN distributed control system. It converts digital control signals from the controller into standard analog 4-20mA output signals to drive field actuators, control valves, positioners and other final control elements. This module provides isolated analog channels, signal diagnostics and fault reporting, serving as an important interface between DCS control logic and field process equipment. It is widely used as a spare replacement card for legacy petrochemical, refining and power plant DCS racks.

It supports rack installation with backplane connection, features channel isolation to reduce ground loop interference, and can work stably in continuous process control environments. Each channel can be configured independently for control output, and it uploads channel status and fault information to the TDC3000 operator station.
Part Number
ADA232 029.202426
System Platform
Honeywell TDC3000 LCN
Signal Type
4-20mA Analog Output
Isolation
Channel Isolated
Mounting
Rack Backplane Mount
Application
Process Control Output
Key Features
Standard 4-20mA Analog Output
Converts digital control commands from the TDC3000 controller into 4-20mA current signals for regulating control valves, dampers, actuators and other field final control devices.
Channel Isolation Design
Built-in isolation between channels and backplane, effectively suppressing ground loop noise and electromagnetic interference, improving signal stability in industrial field wiring.
Onboard Channel Diagnostics
Continuously monitors output circuit status, detects open circuit, short circuit and module fault, and sends fault alarm information to the TDC3000 operator station for maintenance prompt.
Seamless TDC3000 LCN Integration
Native matching Honeywell TDC3000 LCN system, communicates with controller and UCN interface, supports configuration, calibration and signal viewing through DCS workstation software.
High Stability for Continuous Process
Industrial-grade component design, long-term continuous operation suitable for 24/7 running process plants, low drift and high repeatability for closed-loop control.
Independent Channel Configuration
Each output channel can be calibrated and configured separately, supporting different control loops, convenient for flexible distribution of flow, temperature, pressure and level regulation points.
Legacy DCS Maintenance Spare
End-of-life TDC3000 series card, widely stocked as emergency spare part for plant overhaul, faulty card replacement and loop reconstruction of old Honeywell DCS systems.
Typical Applications
Analog control output for Honeywell TDC3000 distributed control systems.
Petrochemical & Refinery Plants
Flow, temperature and pressure closed-loop control for reactors, distillation columns and heat exchangers.
Power Generation Plants
Boiler control valve, damper and fuel regulation output for legacy TDC3000 DCS.
Natural Gas Processing
Regulating valve control for gas separation, compression and transmission process loops.
Chemical Process Plants
Level control, pH adjustment and continuous process regulation output for chemical production lines.
TDC3000 System Retrofit
Spare replacement, channel expansion and maintenance of existing LCN control racks.
Water & Wastewater Treatment
Control output for dosing valves, flow control and tank level regulation in large treatment stations.
Frequently Asked Questions
Which DCS system does ADA232 029.202426 belong to?
It is an analog output module for Honeywell TDC3000 LCN distributed control system, used to output 4-20mA control signals to field actuators.
What field devices can this module drive?
It outputs standard 4-20mA signals, suitable for control valves, electric positioners, dampers, variable signal converters and other 4-20mA receiving control equipment.
Does it support channel fault detection?
Yes, the module diagnoses open circuit, short circuit and hardware failure of each channel, and uploads alarm information to the TDC3000 operator station.
How to calibrate the analog output channels?
Calibration is completed via TDC3000 workstation configuration software, matching the 4mA zero point and 20mA full scale to ensure output accuracy.
Is this part end-of-life?
TDC3000 is a legacy DCS platform, ADA232 series has been discontinued. We supply tested surplus and refurbished units for plant spare and emergency replacement.
What should I confirm before replacement?
Confirm the rack type, backplane version, original part suffix and loop load condition; re-calibrate channels after installation to guarantee control accuracy.