KIMI Phone:+86 18059884790      中文版
other
VT-VRPD-2-21/V0/0-0-1 Vibro-Meter Vibration Protection Module
  • Warehouse: Spot
  • Warranty: 365 days
  • Quality: Original module
  • Condition: New
  • Shipping method: Courier delivery

  • Contact person: LI MING
  • Contact number: +86 18059884790
  • WeChat:18059884790
  • E-mail: plc66@qq.com

Product Description
Vibro-Meter  |  Vibration Monitoring Module

VT-VRPD-2-21/V0/0-0-1 Vibro-Meter Vibration Protection Module

VM600 System Component  ·  Rotor Vibration & Position Monitoring Card

Product Overview

The VT-VRPD-2-21/V0/0-0-1 is a dual-channel vibration and relative position monitoring module designed for the Vibro-Meter VM600 rack-based machinery protection system. It accepts input from eddy current proximity probes, measures shaft relative vibration, shaft position and axial displacement in rotating machinery. The module provides configurable alarm and trip thresholds, real-time measured values, buffered waveform capture and relay outputs, complying with machinery protection standards. It is a critical spare for turbine, compressor and large motor condition monitoring racks.

image.png

It communicates with the VM600 CPU card for data upload, status display and configuration. Suitable for continuous protection monitoring of high-speed rotating equipment in power, oil & gas and process industries, it supports hot swap inside the VM600 chassis to reduce maintenance downtime.

Part Number
VT-VRPD-2-21/V0/0-0-1
System
Vibro-Meter VM600
Channels
2 Independent Measurement Channels
Sensor Type
Eddy Current Probe
Mounting
Rack Plug-in, Hot Swappable
Measurement
Relative Vibration / Shaft Position

Key Features

Dual Channel Eddy Current Signal Processing
Two independent input channels for eddy current probes. It processes shaft relative vibration, radial displacement and axial position signals simultaneously, supporting two probe measurements on the same or different shafts.
Configurable Alarm & Trip Protection
Each channel has independent alarm and trip setpoints. Thresholds, time delays and latching logic can be configured via VM600 software to match machine protection requirements.
Waveform Capture & Fault Recording
On-board transient recording captures vibration waveforms when alarms or trips trigger. Recorded data helps engineers analyze rotor rub, imbalance, misalignment and other rotating machinery faults.
Hot Swap VM600 Rack Module
Standard VM600 rack form factor, hot-swappable in compatible chassis. Replacement can be carried out without powering down the whole monitoring rack, reducing plant downtime.
Sensor Cable & Probe Health Monitoring
Built-in probe fault detection for broken cable, short circuit and power failure. The module reports sensor health status to the VM600 controller to avoid blind protection failure.
High Precision Industrial Measurement
Stable signal sampling for high-speed rotating shafts. It maintains good accuracy under high electromagnetic interference environments in turbine and compressor cabinets.
Seamless Integration with VM600 System
Works with VM600 CPU cards, power supply and other I/O modules. All measurement data, alarms and fault logs are transmitted to host SCADA and monitoring HMI.

Typical Applications

Rotating machinery protection monitoring based on Vibro-Meter VM600 platform.
Gas & Steam Turbines
Shaft radial vibration and axial thrust position monitoring for power generation turbines.
Centrifugal & Screw Compressors
Rotating shaft vibration protection for refinery, pipeline and offshore compressors.
Large Industrial Pumps & Fans
Shaft displacement monitoring for high-power critical pumps and induced draft fans.
Oil & Gas Platforms
Machinery protection systems for offshore rotating equipment and process trains.
Captive Power Plants
Turbine machinery protection retrofit and spare part replacement for industrial power stations.
VM600 Rack Maintenance
Spare stock, channel expansion and fault card replacement for existing VM600 monitoring systems.

Frequently Asked Questions

What system does VT-VRPD-2-21/V0/0-0-1 belong to?
It is a Vibro-Meter VM600 series dual-channel relative vibration and position monitoring module, used for eddy current probe signal acquisition and machinery protection.
What sensor does this module work with?
It is designed for eddy current proximity probes, used to measure shaft relative vibration, radial displacement and axial thrust position.
Does it support hot swap?
Yes, it is hot-swappable in the matched VM600 rack chassis, which supports online replacement without shutting down the whole monitoring system.
How to configure the module parameters?
Use official VM600 configuration software to set probe sensitivity, alarm/trip values, delay time and waveform recording parameters.
Can it detect probe and cable faults?
Yes, it monitors probe power supply, short circuit and open circuit conditions. It will generate fault alerts to remind maintenance personnel of sensor failure.
What should I confirm before ordering replacement?
Verify the VM600 chassis slot type, firmware compatibility, probe sensitivity and the original part number suffix to avoid mismatch after installation.


Related recommendations