KIMI Phone:+86 18059884790      中文版
other
VME-PMC-CADDY 6U VME to PMC Mezzanine Carrier
  • Warehouse: Spot
  • Warranty: 365 days
  • Quality: Original module
  • Condition: New
  • Shipping method: Courier delivery

  • Contact person: LI MING
  • Contact number: +86 18059884790
  • WeChat:18059884790
  • E-mail: plc66@qq.com

Product Description
ESD / GE  ·  VME-PMC-CADDY VME PMC Carrier Board

VME-PMC-CADDY 6U VME to PMC Mezzanine Carrier

VME-PMC-CADDY is a legacy 6U VME64 PMC carrier board, designed by ESD, widely used in GE Mark VI turbine control racks. It integrates a PCI-to-VME bridge to host PMC mezzanine cards, adding Ethernet, serial, digital I/O and communication functions to VME systems, a common upgrade spare for VME chassis together with VMIVME-4140, TVME200.

image.png

Model: VME-PMC-CADDY      Brand: ESD / GE Fanuc      Status: EOL Legacy Spare      Form Factor: 6U VME Single Slot      Origin: Germany      Warranty: 12 Months
Request Price & Lead Time      Ask for Test Report

Product Overview

VME-PMC-CADDY is a VME64 carrier with Tundra PCI-X to VME bridge chip TS148, supporting 2 single-width PMC or 1 double-width PMC module compliant with IEEE1386.1. It routes PMC I/O signals to VME P2 rear connector, supports VME A16/A24/A32 addressing, 32-bit PCI at 33MHz. Variants include standard VME-PMC-CADDY and VME-PMC-CADDY/2 with enhanced reset and interrupt control. It is widely used to add PMC Ethernet, serial, ARINC and digital I/O into GE Mark VI turbine control VME racks.

PMC Slots2 single / 1 double width PMC (IEEE1386.1)
Bridge ChipTundra TS148 PCI-X to VME bridge
VME BusVME64, A16/A24/A32, 32bit VME slave/master
PMC I/O RoutingPMC I/O to VME P2 rear connector
Operating Temp-40°C ~ +85°C rugged industrial grade

Key Features & Functions

Core features of the VME-PMC-CADDY PMC carrier module.

01

PCI-X to VME transparent bridge

TS148 bridge enables seamless address mapping between PMC PCI bus and VME backplane.

02

Flexible PMC mixing support

Host dual single PMC or one double PMC, compatible with Ethernet, serial, analog, digital PMC cards.

03

Rear P2 I/O routing

PMC I/O signals wired to VME P2 connector for rear wiring turbine cabinet installations.

04

Configurable reset & interrupt control

VME power-up option bits to control PMC reset, slot ID, interrupt mapping and system fail signals.

05

Conformal coated PCB

Anti-humidity coating for power plant, marine and high vibration control cabinet environments.

06

VME64 compatible

Works on standard VME32 / VME64 backplanes, compatible with existing VME CPU and I/O boards.

Application Scenarios

Typical installation and replacement scenarios for VME-PMC-CADDY.

GE Mark VI Turbine Control Rack

Add PMC Ethernet or communication cards to Mark VI VME crates for turbine controller networking.

Legacy VME System Upgrade

Upgrade old VME racks with modern PMC I/O without replacing the whole VME backplane and CPU.

VME Communication Expansion

Host PMC Ethernet, RS485, ARINC, Profibus PMC modules for plant communication links.

Industrial Test & Simulation

VME test benches with mixed PMC I/O for turbine control hardware simulation and validation.

Power Plant Balance-of-Plant Control

VME-based auxiliary control racks with PMC I/O for boiler, pump and valve control systems.

Rugged Embedded VME

Military, marine and ground test VME systems with PMC avionics and data acquisition modules.

Frequently Asked Questions

Q. What is VME-PMC-CADDY?

It is a 6U VME64 PMC carrier board with Tundra TS148 bridge, used to mount PMC mezzanine cards into VME racks, widely used in GE Mark VI turbine control systems.

Q. What is the difference between VME-PMC-CADDY and VME-PMC-CADDY/2?

CADDY/2 adds improved reset sequencing, enhanced slot ID and SFAIL signal control for critical turbine safety applications.

Q. Can it work with VMIVME-4140 and TVME200?

Yes, all are standard 6U VME boards and can coexist in the same VME chassis for Mark VI control and monitoring.

Q. Does it support DMA?

Yes, the TS148 bridge supports DMA transfers between PMC PCI bus and VME bus for high throughput data.

Q. Is this board still in production?

No, it is end-of-life, available as refurbished, tested surplus legacy spare for existing VME Mark VI installations.

Q. Are units tested before shipment?

All VME-PMC-CADDY modules undergo VME bus communication, bridge function and PMC slot test. Test report can be provided upon request, standard warranty is 12 months.

Need VME-PMC-CADDY spare for your GE Mark VI VME rack?

Confirm if you need standard or /2 version, plus PMC card model, we will verify compatibility and quote price and lead time quickly.


Related recommendations