News
Featured
Contact Us
Contact: POWER DUKE
Phone: +86 18059884790
E-mail: plc66@qq.com
Add: fujian xiamen
- Warehouse: Spot
- Warranty： 365 days
- Quality: Original module
- Condition： New
- Shipping method: Courier delivery
- Contact person: LI MING
- Contact number: +86 18059884790
- WeChat：18059884790
- E-mail: plc66@qq.com
GE Fanuc IC693DNM200-BD — Series 90-30 DeviceNet Master Module
The IC693DNM200-BD is a module from the GE Fanuc Series 90-30 (later GE Intelligent Platforms / Emerson) programmable-logic-controller family — and this is a new manufacturer for this list, alongside B&R, Bently Nevada, DeltaV and epro. The part splits into IC693 (the Series 90-30 module prefix), DNM (DeviceNet Master), 200 (the specific version) and -BD (a revision/config suffix). It is a DeviceNet scanner/master communication module that lets the 90-30 CPU control and exchange I/O data with DeviceNet slave devices. Typically used as a genuine spare for existing Series 90-30 installations.
- GE Fanuc Series 90-30 (IC693) PLC module
- DeviceNet Master / scanner communications
- New manufacturer for this list
- Enables CPU ↔ DeviceNet slave-device I/O exchange
- Legacy PLC spare part
Key Features & Functions
DeviceNet Master Function
Acts as a DeviceNet scanner/master, controlling and polling DeviceNet slave devices on the network.
PLC I/O Integration
Maps DeviceNet device data into the Series 90-30 CPU’s I/O references so the ladder program can use it.
Series 90-30 Platform
Occupies a slot in a Series 90-30 rack, sharing the platform’s backplane and power with the CPU and other modules.
Fieldbus Connectivity
Extends the PLC’s reach to distributed DeviceNet I/O and intelligent slave devices, reducing wiring to the main rack.
Technical Specifications
| Model Number | IC693DNM200-BD |
|---|---|
| Base Part | IC693DNM200 |
| Manufacturer | GE Fanuc / GE Intelligent Platforms / Emerson |
| Family | Series 90-30 PLC |
| Item Type | DeviceNet Master / scanner module |
| Network | DeviceNet |
| Suffix -BD | Revision / configuration suffix (confirm) |
Source note: IC693 identifies the GE Fanuc Series 90-30 platform and DNM the DeviceNet Master module. The exact slave-device capacity, data
rate and the meaning of the -BD suffix should be verified against the official
GE/Emerson documentation before ordering or replacing.
Typical Application Scenarios
- Distributed I/O: connecting remote DeviceNet I/O blocks to the 90-30 CPU.
- DeviceNet Networks: controlling drives, valve islands, sensors and I/O on DeviceNet.
- Process & Factory Automation: expanding an existing 90-30 control system.
- System Upgrades / Spares: replacing a failed module in an existing installation.
Frequently Asked Questions
What is the IC693DNM200-BD?
It is a GE Fanuc Series 90-30 DeviceNet Master/scanner module — base part IC693DNM200, with a -BD suffix — used to connect DeviceNet devices to a 90-30 PLC.
What does “IC693DNM200” break down into?
IC693 = Series 90-30 platform; DNM = DeviceNet Master; 200 = version; -BD = revision/config suffix. Confirm details in
the official documentation.
What is DeviceNet used for?
DeviceNet is a fieldbus for connecting devices such as drives, valve manifolds, sensors and distributed I/O. This module lets the 90-30 CPU exchange data with them.
Is it still supported?
The Series 90-30 is a legacy platform; availability and support status should be confirmed with the manufacturer or an authorized distributor.
Where can I find the official documentation?
Official manuals are available from GE/Emerson and authorized distributors. Verify all specifications there before purchase.
