Unconfirmed Part Number | BTC-302
BTC-302 Industrial Automation Module
Note: No authoritative public datasheet found for BTC-302; please confirm brand and full part suffix · Possible typo: CT-302 / IC695CPE302 / TCM302
Product Overview
BTC-302 is not a standard mainstream part number from GE, ABB, Allen‑Bradley, Moxa, ProSoft, Woodward or Honeywell. It may be a local OEM code, internal project code, distributor alias, or a typo (CT-302, CPE302, TCM302). If this is a turbine, DCS or PLC spare part, please provide the original brand, system platform (Mark VIe, RX3i, ControlLogix, 800xA) and full suffix for accurate specs.

If you meant CT-302 (ABB legacy control card): discontinued ABB control board; IC695CPE302 is Emerson RX3i PAC CPU; IC693TCM302 is GE 90‑30 thermocouple input module.
Status
Unverified OEM / Alias / Possible Typo
Common Confused PN
CT-302 / CPE302 / TCM302
Platform Requirement
Need Brand & System Rack Info
Document Availability
No Public SDS / MTC / COO
Function To Confirm
CPU / I/O / Termination / Gateway
Notes & Verification Checklist
Check for Transcription Error
Many similar part numbers are easily misread: CT-302, CPE302, TCM302, DFI302, FDI302, SPA-ZC302.
Check If It Is Distributor Internal SKU
Some traders use BTC-xxx as their own stock code, not the manufacturer original part number.
Check System Where This Card Is Installed
Mark VIe, RX3i, ControlLogix, 800xA, S800, Triconex, Woodward, Modicon will decide the correct datasheet.
Check Silkscreen On PCB Sticker
Original PN is usually printed on the PCB label, not the outer packing label.
Check Suffix Revision
Suffix like -T, -CFD, -R, -XT changes temperature grade, coating and redundancy function.
Required Info For Full Product Page
Brand, original manufacturer PN, system, function, voltage, protocol, temperature range, conformal coating yes/no.
If BTC-302 Is Non-Automation Product
It may be power supply, sensor, relay, meter, communication modem or other instrument, not PLC/DCS module.
Potential Application Scenarios (Pending Confirmation)
Only after confirming original part number can application be finalized.
Power Plant Turbine Control
Gas/steam turbine protection, speed, trip, interlock I/O.
Process DCS / PLC System
Analog input, thermocouple, communication gateway, CPU controller.
Oil & Gas Wellhead / Pipeline
RTU, instrument signal acquisition, Modbus / Fieldbus interface.
Water & Wastewater Automation
Sensor, valve, pump control and remote monitoring.
Factory Automation Retrofit
Legacy spare replacement for discontinued rack I/O cards.
Marine / Offshore Auxiliary Control
Conformal coated I/O and communication interface for salt fog environment.
Frequently Asked Questions
Is BTC-302 an original manufacturer part number?
No, no major industrial OEM lists BTC-302 as official part number. It is likely a trader code or typo.
What should I send you to generate correct product page?
Original PN on PCB sticker, brand, system platform, photo of the module label, function description.
Can I get HS code, MTC, COO, SDS for BTC-302 now?
Not available until original manufacturer part number is confirmed.
What is the most common typo for BTC-302?
CT-302 (ABB legacy control card), IC695CPE302 (Emerson RX3i CPU), IC693TCM302 (GE thermocouple input).
Is BTC-302 compatible with Mark VIe?
Cannot confirm; Mark VIe official series starts with IS200xxxx, not BTC prefix.
What to confirm before quotation?
Original manufacturer PN, new / refurbished, conformal coating, test report, delivery term, certification requirement.